- 1). Pour about 1 tbsp. of rubbing alcohol onto a cotton ball.
- 2). Wipe your ear lobe with the rubbing alcohol to clean it thoroughly. Wait a few seconds for the alcohol to dry.
- 3). Twist the stud using your thumb and forefinger. This will help to loosen the post in your ear and break off any scabs that may have formed inside the ear hole.
- 4). Grasp onto the backing with one hand -- again, using your thumb and forefinger -- while your other fingers are still pinching the stud.
- 5). Twist the stud while holding the backing firmly. This will help to loosen the backing.
- 6). Pull forward on the stud while still holding the backing firmly. Although it takes more effort than removing a normal earring, the post will slide right out of the backing. Gently and slowly, remove the post from your ear. Repeat these steps to remove the other earring.
- 7). Clean off the post of a new earring with the rubbing alcohol, then insert the new post into your ear. You can simply throw away your starter stud earrings once removed.
Source...