Pre-Placement Planning of an Immediate Load Dental Implant
The placement of an immediate load dental implant cannot occur until the dentist is confident of exactly where to place the titanium against the bone.
The actual surgery that implants the pieces is nothing once the leg work of discovering where the incisions must be made have been determined.
The immediate load dental implant can be a risky operation for the dentist to perform.
They are not life threatening to the patient, but the dentist cannot afford to attempt the surgery on a patient that does not have an adequate amount of bone for them to attach the titanium to.
Without enough bone on the jawbone the surgery will stand greater than a seventy five percent chance of failing.
If the surgery is a failure it must be performed again at greater risks and greater cost.
The quantity of jawbone the dentist will have to work with is important to determine in the pre-placement planning stages of the immediate load dental implant.
The quality of the bone will also be determined.
If the bone that you have making up your jawbone is in some manner compromised or weak then you are not a good candidate for the surgery and the dentist is likely to suggest a different type of false teeth placement for you.
Trust your dentist and their opinion of what they can do and the confidence they have that the surgery will be a success.
The immediate load dental implant places the visible teeth in the empty socket on the same day the surgery is done.
The original version of these surgeries had the patient wait for the teeth to be loaded for periods of two to six months.
The pre-planning phase is important in the original versions of the surgery so the dentist does not interfere with the patient's sinus cavities, but in the surgeries that will have teeth placed on them the same day the surgeon must be one hundred percent sure that the titanium is being put in the exact position it needs to be in.
The dentist will have the patient come into their office for a thorough check of their oral situation.
All teeth will be examined for weakness and complications and the dentist will order x-rays of the mouth to be taken.
The dentist may also order a CT scan or other tests that give them a visual image of the jawbone they will be working on.
The dentist will take a wafer thin material and place it in your mouth to make a pattern to follow when they do the surgery.
They will drill holes in this pattern where they need to make their incisions during surgery.
The pattern is very important and will guide them through the surgery.
This portion of the procedure generally takes longer than the actual implanting of the titanium takes.
It is important that the dentist follows the old construction rule of measure twice and cut once so they make no mistakes.
The actual surgery that implants the pieces is nothing once the leg work of discovering where the incisions must be made have been determined.
The immediate load dental implant can be a risky operation for the dentist to perform.
They are not life threatening to the patient, but the dentist cannot afford to attempt the surgery on a patient that does not have an adequate amount of bone for them to attach the titanium to.
Without enough bone on the jawbone the surgery will stand greater than a seventy five percent chance of failing.
If the surgery is a failure it must be performed again at greater risks and greater cost.
The quantity of jawbone the dentist will have to work with is important to determine in the pre-placement planning stages of the immediate load dental implant.
The quality of the bone will also be determined.
If the bone that you have making up your jawbone is in some manner compromised or weak then you are not a good candidate for the surgery and the dentist is likely to suggest a different type of false teeth placement for you.
Trust your dentist and their opinion of what they can do and the confidence they have that the surgery will be a success.
The immediate load dental implant places the visible teeth in the empty socket on the same day the surgery is done.
The original version of these surgeries had the patient wait for the teeth to be loaded for periods of two to six months.
The pre-planning phase is important in the original versions of the surgery so the dentist does not interfere with the patient's sinus cavities, but in the surgeries that will have teeth placed on them the same day the surgeon must be one hundred percent sure that the titanium is being put in the exact position it needs to be in.
The dentist will have the patient come into their office for a thorough check of their oral situation.
All teeth will be examined for weakness and complications and the dentist will order x-rays of the mouth to be taken.
The dentist may also order a CT scan or other tests that give them a visual image of the jawbone they will be working on.
The dentist will take a wafer thin material and place it in your mouth to make a pattern to follow when they do the surgery.
They will drill holes in this pattern where they need to make their incisions during surgery.
The pattern is very important and will guide them through the surgery.
This portion of the procedure generally takes longer than the actual implanting of the titanium takes.
It is important that the dentist follows the old construction rule of measure twice and cut once so they make no mistakes.
Source...